Bronco Tie-Down Anchor PRO
Bronco Tie-Down Anchor PRO
351 in stock
Couldn't load pickup availability
Tie-Down with this Sturdy Solution
GPCA™ Ford Bronco 2021+ Tie-Down Anchor PRO
T-handle quick-release hardtop bolts for the Bronco cargo tub edge. The base set is an 8-Pack (M8-1.25 × 25 mm); the 10-Pack and 12-Pack add GP-Star bolts for the top-forward hardtop mounts.
Introducing the new durable GPCA Tie-Down Anchor PRO - newly built T-handle screw. With its SUPER VERSATILE capabilities, use it as a handle, grip, hook, or anchor for your straps and add-ons. Just screw them in, adjust the T-handle angle you need with our padded washer, and just like that your tub edge is always protected.
Application: They thread straight into your Bronco's factory M8-1.25 hardtop mounting holes, so your cargo area gets 8 tie-down points on the tub edge, whether the hardtop is on or off.
Designed to Last: Galvanized coated metal screw with an engineered ABS T-handle reinforced with nylon. Dimensions: M8 - 1.25 screw, 62 mm (~2.44 in) wide T-handle, 25 mm bolt length.
Watch the Bronco install







Strap your stuff on them, use them as a handgrip, hang stuff on them. There are many uses that make your cargo more versatile!
- SUPER VERSATILE - Use as a handle, grip, hook, or anchor for your straps and add-ons.
- RUGGED LOOK - Beautifully integrated with your vehicle, with rubber-backed washers.
- Extra mounting points - 3 on each C-pillar (6 total), in addition to the 8 mounting points on the tub edge.


Top-forward bolts: 10-Pack or 12-Pack
- 10-Pack + 8 D-Ring for 2021–2023: 2 GP-Star bolts on top (one on each side) that secure the front edge of the rear shell.
- 12-Pack + 8 D-Ring for 2024–2026: Ford updated the hardtop design, adding a second bolt to each side, so 4 GP-Star bolts on top.


Where each combo mounts
Your Bronco has 8 tub-edge mounting points, 6 more on the C-pillar (3 per side), and 2 or 4 top-forward hardtop bolts that use GPCA™ GP-Star (not the T-handle Anchor). A plain Anchor PRO and an Anchor + D-ring both fit all 8 tub-edge points and all 6 C-pillar points. The 8-Pack + 6 D-Plate still puts all 8 anchors on the tub edge, but the 2 tub-edge points next to the C-pillar are too tight for a D-plate — so those two stay a plain T-handle, and you get 6 D-plates instead of 8. That space limit is why this kit is 8 anchors + 6 D-plates, not 8+8. Tub-edge kits (8-Pack, 8+8 D-Ring, 8+6 D-Plate) do not include the top-forward GP-Stars — pick 10-Pack + 8 D-Ring (8 Anchors + 2 GP-Star) for 2021–2023, or 12-Pack + 8 D-Ring (8 Anchors + 4 GP-Star) for 2024–2026. Under each D-plate, a square nut and rubber washer lift the plate about 5 mm so a strap can pass through. Each Anchor PRO ships with one rubber washer and one metal washer. Anchors, D-rings and D-plates carry GPCA™'s 1-year limited warranty.

Shown in Black. 8 anchors, 6 D-plates, and a square nut and rubber washer for each D-plate. Also available in Red, Blue and Orange.
| Combo | Tub-edge (8) | C-pillar (6) | Top-forward GP-Star | Notes |
|---|---|---|---|---|
| Anchor PRO alone (8-Pack) |
All 8 — plain T-handle | Yes — all 6 | Not included — add 2 or 4 GP-Star separately | Quick-release hardtop bolts that also work as tie-down hooks |
| Anchor + D-ring (8-Pack + 8 D-Ring) |
All 8 — swiveling D-ring at every point | Yes — all 6 | Not included — add 2 or 4 GP-Star separately | A loop at every tub-edge point; same anchors also fit the C-pillar |
| Anchor + D-plate (8-Pack + 6 D-Plate) |
All 8 anchors; D-plate on 6 only — the 2 next to the C-pillar stay plain anchors | Anchors yes; D-plates are for the tub edge (not this C-pillar set) | Not included — add 2 or 4 GP-Star separately | Space at the 2 tub-edge spots beside the C-pillar is why it is 8+6, not 8+8. Square nut + rubber washer under each D-plate lifts ~5 mm for strap clearance. Six flat strap slots are plenty for cargo and gear. |
| 8 Anchors + 2 GP-Star (10-Pack + 8 D-Ring) — 2021–2023 |
All 8 Anchors + 8 D-rings | Anchors / extras yes (extra GP-Stars can go on the C-pillar) | 2 GP-Star on top (one each side) securing the front edge of the rear shell | Complete hardtop bolt set for 2021–2023: tub-edge Anchors + top-forward GP-Stars. GP-Star is the low-profile star head for the tight top bolts. |
| 8 Anchors + 4 GP-Star (12-Pack + 8 D-Ring) — 2024–2026 |
All 8 Anchors + 8 D-rings | Anchors / extras yes (extra GP-Stars can go on the C-pillar) | 4 GP-Star on top (Ford added a second bolt each side) | Complete hardtop bolt set for 2024–2026. Primary Bronco recommendation when replacing the full factory bolt set. |
Install in about 5 minutes
- Remove the factory hardtop bolts (8 on the tub edge, plus 2 or 4 top-forward bolts if you are replacing those too).
- Rubber washer first, against the body, then the metal washer on top.
- Hand-tighten each T-handle clockwise until snug. Torque spec is 158 in-lb each; do not over-force.
Difficulty level: Easy. More install help: Tie-Down Anchor & Bolt FAQ.
Pick Your Color. Match Your Build.

The Anchor PRO comes in Black, Red, Blue, and Orange, so you can keep your setup stealthy, add a bold accent, or match your tow hooks, recovery gear, or GPCA handles.
Product Specs
| Thread | M8-1.25 × 25 mm |
|---|---|
| Material | Galvanized coated metal screw; Engineered ABS with reinforced Nylon T-handle |
| Head style | T-Handle quick-release |
| Tool-free install | Yes |
| Fitment | 2021+ Ford Bronco (4DR & 2DR with M8 hardtop mounting points) |
| Hardtop direct replacement | Yes — replaces factory Bronco hardtop bolts |
| Doubles as tie-down | Yes — also works as standalone tie-down points for cargo and gear |
| Compatible with | GPCA Bronco Cargo Cover, D-rings, and the Bronco GP-Star Bolt (sister M8 SKU) |
| Color options | Black, Red, Blue, Orange |
| Pack quantity | 8 anchors per set (matches the Bronco's 8 tub-edge mounting points). 10-Pack and 12-Pack add 2 or 4 GP-Star bolts for the top-forward mounts |
| Install time | 5 minutes |
| Tools required | None after the first install (a driver is needed once to remove the factory bolts) |
Fitment: Ford Bronco 2021+ with hardtop, 2-door and 4-door (not compatible with the Bronco Sport).
Soft top note: The tub-edge packs are for hardtop Broncos. A soft top covers the tub edge, so they do not fit a soft-top Bronco. With a soft top, you can still use the Anchor or the GP-Star at the C-pillar mount for bags, coolers and tools.
Warranty and shipping: Anchors, D-rings and D-plates carry GPCA™'s 1-year limited warranty (warranty terms). See our shipping policy for current rates and delivery times.
Related: Bronco GP-Star Tie-Down Bolt · Tie-Down D-Rings · Bronco Cargo Cover
SKU:BQR



































