GP-Grip AIR — Airbag-Safe Handle for Jeep Wrangler (2024+)

Is this right for your vehicle?
✅ 2024+ Jeep Wrangler JL / 4xe — you're in the right place
➡️ Gladiator 2024+ — front roll bars only — see GP-Grip AIR for Gladiator
➡️ 2007–2023 Wrangler — see GP-Grip PRO
❌ Sky One-Touch Power Top (SOT) — not compatible with SOT installed
❌ Ford Bronco — not compatible; see the GP Back Grip PRO headrest handles

Jeep's 2024+ Wrangler redesign put side-curtain airbags in the roll bar, under a plastic cover. There is no roll bar padding on these bars. That's a genuinely good safety upgrade — but it also means the grab handles that worked on a 2020 JL won't work on yours. Most aftermarket handles either block the airbag path or were never designed with it in mind. The GP-Grip AIR was built specifically around this with a patented 4-point strap system. The top 2 straps loop on D-rings that take the 2 top factory screws, and the 2 bottom straps bolt under the roll bar with factory screws. The straps sit on the outside, metal side of the roll bar, clear of the side-curtain airbag deployment path on the inside. Rock-solid, non-swinging grip without touching your Jeep's safety system.

If you've been white-knuckling the door frame on trail rides, steadying passengers after a mud run, or just want your 2024 Wrangler to feel more purpose-built — this is the handle.

Which pack do you need?
2 Front Roll bar — driver and passenger front roll bar positions. Best starting point.
4 Front & Back — all four roll bar positions, front and rear.
2 Front + 2 Headrest — front roll bar handles plus headrest handles for rear-seat passengers.
4 Front & Back + 2 Headrest — the full setup: every roll bar position and headrest handles.
2 Back Roll bar — rear roll bar positions only.
4 Front & Back + 2 Headrest + Cargo Tiedown + Tag — 4 GP-Grip AIR (front and back roll bars), 2 headrest handles, 6 anchors, 6 D-plates and a red tag.

Airbag-safe — not just airbag-compatible
A lot of handles say "airbag-compatible" and mean it loosely. On the GP-Grip AIR, the straps stay on the outside, metal side of the roll bar, clear of the side-curtain airbag deployment path on the inside. That's not just a label, that's the whole engineering brief.

Built for the trail, not just the parking lot
6061 aero-grade aluminum handle. Double-layered heavy-duty polyester straps with a 4-ring load distribution mount that eliminates the wobble you get from single-point attachments. 250 lb static load rating. The grip padding is reversible — sleek aluminum side out for the street, cushioned side out when you're crawling rocks. No rattle, no spin, no loosening after a season on the trail.

About 5 minutes per handle, no drilling
A Torx screwdriver is required: the AIR mounts with your Jeep's factory screws, so there are no new holes and it comes off as clean as it went on. The hardtop and freedom panels can stay on if you use a screwdriver extension for the Torx bit; without one, removing the freedom panels makes the factory screws easier to reach. Not compatible with the Sky One-Touch Power Top while it's installed.

13 colors in 6061 aero-grade aluminum
Black, Silver, Blue, Army Green, Neon Green, Orange, Picket Gray, Pink, Red, Metallic Gray, White, Yellow, Purple. Match your tow hooks, go full contrast, or just pick the one that's been living in the back of your head.

No more swinging

Airbag-Compatible Design for Safety: The GP-Grip AIR features a patented design that ensures compatibility with side-curtain airbags in the 2024+ Jeep Wrangler JL and 4xe. This allows for a secure, no-swing grip without compromising the safety features of your Jeep. The design includes reversible, removable handle padding, so you can choose between a sleek aluminum look or a cushioned grip.

Enhanced Jeep Experience: Made from aero-grade aluminum for comfort and style, the GP-Grip AIR gives your 2024+ Wrangler (2-door and 4-door) a steady, secure grip that improves both the look and the function of your interior.

Built Tough for Adventure Seekers: 250 lb workload capacity per handle. Its solid metal 4-ring mount and double-layered straps give a firm, non-wobbling hold on the bumpiest roads.

Personalize Your Jeep: The one-size-fits-all handle gives a comfortable grip for every rider.

Strap placement

Instruction manual and more FAQ: GP-Grip AIR install guide

ADDITIONAL INFORMATION
Fitment: 2024+ Jeep Wrangler JL / 4xe (2-door and 4-door) — airbag-equipped roll bar, front and rear
Not compatible: Sky One-Touch Power Top (SOT) | 2007–2023 Wranglers (use GP-Grip PRO) | Gladiator rear roll bar positions | Ford Bronco
Installation time: about 5 minutes per handle | Tools: Torx screwdriver | Difficulty: Easy | No drilling required
Warranty: Lifetime warranty on hardware; 1-year on fabric parts.

Related: GP-Grip Parts & Add-ons (2024+ AIR mount kit) · GP Back Grip PRO (mounts on the headrest, not the roll bar)