SWEPCO | 708 Premium R&O Industrial Turbine Oil | USDA/NSF H2 Lubricant

$210.32 USD

Sale Sold out

Shipping calculated at checkout.

Low stock: 2 left

Viscosity 10/ISO 32 15/ISO 46 20/ISO 68 40/ISO 150 50/ISO 220

Pack Type Bulk Bin - 275 GALLONS Cs 6-1Gal Drum - 55 GAL /400 LBS Pail - 5 GAL / 35 LB

Extended Service. Extreme Protection. Engineered for Industry.

SWEPCO 708 Premium R&O Industrial Turbine Oil is a premium quality, extended service industrial oil formulated to deliver superior performance under the most demanding operating conditions. Industrial and turbine equipment manufacturers agree: sludge, varnish, and carbon deposits from oil oxidation are the #1 cause of equipment inefficiency and failure — and SWEPCO 708 is engineered to stop them.

Blended with Syntheon™ and SWEPCO's most advanced additive chemistry, 708 is inherently superior in resistance to heat and oxidation. Its highly effective oxidation inhibitor delivers protection far above ordinary commercial oils, keeping your equipment running cleaner, cooler, and longer.

Why SWEPCO 708?

Reduces operating temperatures up to 20% — documented by SWEPCO's Energy Savings Program (ESP)
Reduces electrical requirements up to 13% — yielding measurable energy savings
Longer equipment and oil life — lower temps mean improved seal pliability, less oil leakage, and less oil consumption
Extended service intervals — less waste oil disposal and reduced maintenance costs
One oil for a wide range of applications — from vacuum pumps to industrial turbines

Key Features & Benefits

Feature	Benefit
Syntheon™	Uniform viscosity across wide temperature range; improved high-temp oxidation and thermal stability; better low-temp flow; extends service life
Oxidation Inhibitor	Reduces oil thickening; prevents sludge, varnish, and carbon deposits
Rust & Corrosion Inhibitor	Bonds chemically to surfaces to block moisture and acids; protects metal surfaces and seals during shutdown condensation
Anti-Foam Additive	Lowers operating temps up to 25°F by dispersing foam and releasing trapped heat
Oiliness Additive	Penetrates surfaces for superior lubrication
Pour Point Depressant	Better low-temp flow; reduces start-up wear
Energy Savings	Increased "oiliness" reduces friction and electrical consumption — up to 13% amperage savings documented
Long Life	Longer drain cycles reduce waste oil disposal requirements
NSF H2 / Canada Health N-I Certified	Approved for use in food processing facilities where incidental food contact is possible but not intended — suitable for use below the process line or in non-product-contact zones

Applications

SWEPCO 708 provides clean, efficient, long-lasting service across a wide range of industrial equipment:

Vacuum Pumps
Gear Reducers
Gearboxes
Industrial Turbines & Steam Turbines
Blowers & Industrial Blowers
Air Line Oilers
Circulating & Splash Systems
Boiler Feed Pumps
Mist Systems
Oil Cups
Freezer Drive Chains
Cooling Towers
Loom Bearings
Rotary Compressors
Industrial Pumps & Air Tools

Markets Served

Industrial Equipment & Manufacturing
Agricultural Operations
Food Processing Plants (NSF H2 rated — incidental contact zones only)

NSF H2 & Food Plant Use

SWEPCO 708 carries NSF H2 certification, meaning it is authorized for use in food processing and food plant environments where there is no direct food contact. It is suitable for equipment located below the process line or in areas where incidental contact with food is not expected. It is not approved for direct food contact (NSF H1). Always consult your facility's food safety program and HACCP plan before use.

Typical Physical Properties

Property	ISO 32	ISO 46	ISO 68	ISO 100	ISO 150	ISO 220	ISO 460
SAE Grade	10	15	20	30	40	50	140
Viscosity 40°C, cSt	30	44	64.41	96.43	146	215.24	501
Viscosity 100°C, cSt	5.42	6.8	10.5	12.83	16.64	23.36	39
Viscosity Index	117	116	152	129	131	134	121
Flash Point, °C	204	210	214	214	216	218	220
Pour Point, °F (°C)	-33 (-36)	-25 (-32)	-25 (-32)	-25 (-32)	-25 (-32)	-20 (-28)	20 (-7)

Typical Performance Properties

Test	Result (all grades)
Copper Strip Corrosion, ASTM D-130	1a
Rust Test, ASTM D-665, Distilled Water	PASS
Rust Test, ASTM D-665, Salt Water	PASS
Oxidation Stability, ASTM D-943	>8,000 hours
Pump Wear, Vickers, ASTM D-2882	PASS
Foam Test, ASTM D-892	PASS
Demulsibility, ASTM D-1401	40/40/0
RPVOT, ASTM D-2272	1,400+ minutes