Industrial Products

Built for industry. Proven on the track. Trusted by both.

DRIVEN Racing Shop was built on industrial-grade products. Before we were supplying race teams chasing podiums, we were solving the hardest maintenance and lubrication challenges in heavy industry — mining, manufacturing, food processing, compressor stations, and high-cycle machinery. That foundation is why industrial buyers trust us, and why automotive enthusiasts know our products are the real deal.

Industry and Motorsports: The Same Demands, Different Environments

The best industrial products don't care whether they're protecting a 50-ton gearbox running 24/7 or a race engine turning 9,000 RPM. The engineering requirements are the same: extreme pressure resistance, thermal stability, contamination control, and long service life under load. That's why the same SWEPCO gear oils that protect industrial gearboxes are trusted by professional race teams. The same OilSafe color-coded fluid management systems used in aerospace MRO facilities are standard equipment in championship pit lanes. The same Jet-Lube degreasers that clean industrial machinery are used in race shops where cleanliness is a performance variable.

It works in reverse too. Technologies developed to win on the track — ultra-low-friction MoS₂ dry-film coatings, fully synthetic gear oils engineered for extreme temperature swings, Boeing-approved penetrants — deliver measurable gains in industrial environments: longer service intervals, reduced downtime, and lower total cost of ownership.

If it’s good enough to win races, it’s more than good enough for your facility.

What’s in This Collection

🔧 Lubricants & Greases

• Industrial Greases & EP Lubricants — Extreme-pressure bearing greases, open gear compounds, wire rope greases, high-heat formulations, and food-grade NSF H1/H2 options from SWEPCO and Jet-Lube.
• Gear Oils & Gearbox Lubricants — Synthetic and multi-grade gear oils for enclosed gearboxes, differentials, final drives, and industrial transmissions. ISO and SAE viscosity grades available.
• Hydraulic Fluids — AW, synthetic, fire-resistant, and food-grade hydraulic oils for presses, lifts, mobile equipment, and precision hydraulic systems.
• Compressor & Turbine Oils — Synthetic universal AW compressor oils and R&O turbine oils, including NSF H1 food-grade options.
• Engine & Transmission Fluids — High-zinc, moly-enhanced, and synthetic ATF formulations for demanding powertrains in industrial and automotive applications.
• Chain, Cable & Wire Rope Lubricants — High-temp chain and roller lubes, wire rope penetrants, and sprayable open gear compounds for continuous-duty applications.
• Specialty Lubricants — Dry-film MoS₂ sprays, non-metallic anti-seize compounds, MIL-SPEC penetrants, dielectric greases, and fuel system improvers.

🧼 Cleaners, Degreasers & Surface Prep

• Industrial Degreasers — NSF-certified citrus-based and safety solvent degreasers safe on all metals, electrical components, and sensitive surfaces. Non-flammable options available.
• Contact & Safety Cleaners — Dielectric-rated contact cleaners for motors, terminals, and electrical systems. NSF K1 and K2 registered.
• Multi-Surface & Glass Cleaners — Professional-grade cleaners for shop environments, equipment surfaces, and facilities maintenance.
• Power Degreasers — Heavy-duty formulations for cutting through built-up grease, oil, and grime on machinery and shop floors.

📦 Fluid Transfer & Management Systems

• OilSafe Color-Coded Drums & Lids — Sealed, contamination-free fluid storage and transfer containers in 10 standard colors. The global standard for lubrication management.
• Grease Guns — Manual pistol-grip and 18V battery-operated grease guns with clear and steel color-coded cartridge tubes, rated to 5,000–6,000 PSI.
• Fluid Transfer Pumps & Kits — Standard and premium pumps for oils up to ISO 680 / SAE 250, plus electric transfer pump kits for high-volume applications.
• Dispensing Stations & Bulk Systems — 55-gallon drum workstations with 2-way filtration for full facility lubrication management programs.
• Lubricant Identification Labels & Hardware — Label pockets, drum rings, leashes, magnets, and ID washers to build a compliant, contamination-controlled lubrication program.
• Desiccant Breathers — Air Sentry breathers to protect reservoirs, gearboxes, and stored fluids from moisture and particulate ingression.

🧹 Shop Supplies & Consumables

• Lint-Free Wipers & Shop Towels — Spunlace, DRC, and hydroentangled shop towels for solvent-resistant, contamination-free surface prep and cleanup.
• Tack Cloths & Paint Prep Wipers — Professional-grade surface prep for paint, coating, and finishing applications.
• Drain Openers, Ice Machine Cleaners & Facility Supplies — Maintenance essentials for keeping industrial and commercial facilities running clean.

Brands With Real Credentials

SWEPCO — Over 70 years of industrial lubricant engineering. Moly-enhanced, food-grade, and synthetic formulations used in mining, agriculture, manufacturing, and motorsports.
OilSafe — The global standard in color-coded lubrication management. Used in aerospace, food processing, heavy industry, and professional motorsports facilities worldwide.

Air Sentry — Contamination control breathers trusted in aerospace, industrial MRO, food plants and precision fluid systems.
Jet-Lube — Boeing-approved, MIL-PRF-81309H(1) qualified. NSF-registered degreasers, penetrants, and specialty lubricants trusted from aircraft hangars to race garages.

Have a Specific Need? We’ll Support You.

Not every application fits a standard product. Unusual viscosity requirement, regulated environment (food-grade, fire-resistant, oxygen service), custom lubrication program, or just not sure what you need — send us a message and we’ll support you. Our team has the technical depth to match the right product to your equipment, whether it’s a single bearing or an entire facility.

Frequently Asked Questions

Are these industrial products also suitable for motorsports and automotive use?

Many of them are already standard in professional motorsports. Industrial-grade products are engineered for continuous heavy load, extreme temperatures, and long service intervals — the same demands placed on high-performance automotive and racing applications. Products like SWEPCO moly gear oils, Jet-Lube anti-seize, OilSafe fluid management systems, and Jet-Lube degreasers are active in both environments.

Can motorsports-developed products be used in industrial settings?

Yes, when the application is compatible. Synthetic gear oils, dry-film MoS₂ lubricants, and high-performance ATFs developed for racing often outperform conventional industrial products — delivering longer service life, better protection under load, and reduced maintenance frequency.

Do you carry NSF-certified food-grade products?

Yes. We stock SWEPCO NSF H1 and H2 certified greases, gear oils, hydraulic fluids, compressor oils, and food-grade silicone sprays, plus Jet-Lube NSF-registered degreasers and cleaners — suitable for food and beverage processing environments where compliance is required. Also, all OilSafe Lubrication Management products and AirSentry desiccant breathers could be used on NSF H1 or H2 environments, contact us for support.

What is the OilSafe color-coding system and why does it matter?

OilSafe’s color-coded system assigns a dedicated color to each lubricant type across drums, lids, grease guns, and identification labels. This eliminates cross-contamination — one of the leading causes of premature equipment failure and unplanned downtime. It’s the global standard in industrial lubrication management, used in aerospace, food processing, mining, and professional motorsports facilities.

What are desiccant breathers and do I need them?

Desiccant breathers filter moisture and particulates from air entering fluid reservoirs, gearboxes, and storage drums during thermal cycling. Unfiltered air introduces water and contamination that degrades lubricant quality and accelerates wear. Air Sentry breathers are a low-cost, high-impact addition to any serious maintenance program.

What’s the difference between NLGI 0, 1, and 2 greases?

NLGI grade refers to grease consistency. NLGI 0 is semi-fluid — used in centralized lube systems and low-temperature applications. NLGI 1 is slightly firmer, suited for slow-speed or lightly loaded bearings. NLGI 2 is the most common general-purpose grade for standard bearings, chassis fittings, and most industrial equipment. Contact us if you need help matching the right grade to your application.

Can you help me build a complete lubrication or maintenance program for my facility?

Yes. We support industrial accounts with product selection, viscosity matching, color-coding system design, and OilSafe dispensing station configuration. Send us a message with your equipment list and application details and we’ll put together a recommendation.

Do you offer volume pricing for industrial quantities?

We work with industrial accounts and distributors. Contact us directly to discuss volume pricing, bulk availability, and account setup.

Do gearboxes use oil or grease?

Enclosed gearboxes use gear oil — not grease. Gear oil flows through the housing, lubricates gear mesh and bearings, and dissipates heat. Grease is used for open gears, exposed gear racks, and some slow-speed or sealed-for-life bearing applications. We carry both, and we’ll help you identify the right product and ISO/SAE viscosity for your specific gearbox.